HP ProCurve 5400zl Reference Manual page 699

Command line interface, switch software
Hide thumbs Also See for ProCurve 5400zl:
Table of Contents

Advertisement

Command Line Interface Reference Guide
Next Available Options:
minttl
< 1 to 255 > -- Minimum time to live
maxttl
< 1 to 255 > -- Maximum time to live
timeout
probes
< 1 to 5 > -- Number of Probes
maxttl
■ traceroute6 IPV6-ADDR maxttl < 1 to 255 >
Maximum number of hops allowed for each probe packet sent along the
route. If the maxttl value is less than the actual number of hops
required to reach the host, the traceroute output displays only the
IPv6 addresses of the hops detected by the configured maxttl value. <1-255>.
Range: < 1 to 255 >
Default: 30
■ traceroute6 HOST-NAME maxttl < 1 to 255 >
Maximum number of hops allowed for each probe packet sent along the
route. If the maxttl value is less than the actual number of hops
required to reach the host, the traceroute output displays only the
IPv6 addresses of the hops detected by the configured maxttl value. <1-255>.
Range: < 1 to 255 >
Default: 30
minttl
■ traceroute6 IPV6-ADDR minttl < 1 to 255 >
Minimum number of hops allowed for each probe packet sent along the
route. If the minttl value is greater than the actual number of hops,
the traceroute output displays only the hops equal to or greater than the
configured minttl threshold value.
If the minttl value is the same as the actual number of hops, only
the final hop is displayed in the command output.
If the minttl value is less than the actual number of hops, all hops
to the destination host are displayed. <1-255>.
Range: < 1 to 255 >
Default: 1
■ traceroute6 HOST-NAME minttl < 1 to 255 >
Minimum number of hops allowed for each probe packet sent along the
route. If the minttl value is greater than the actual number of hops,
the traceroute output displays only the hops equal to or greater than the
configured minttl threshold value.
If the minttl value is the same as the actual number of hops, only
the final hop is displayed in the command output.
If the minttl value is less than the actual number of hops, all hops
to the destination host are displayed. <1-255>.
Range: < 1 to 255 >
© 2009 Hewlett-Packard Development Company, L.P.
< 1 to 120 > -- Traceroute timeout in seconds
<1-255>.(p. 697)
<1-255>.(p. 697)
<1-120>.(p. 698)
<1-5>.(p. 698)
traceroute6
697

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 3500ylProcurve 8200zl6200yl

Table of Contents