Command Details - HP ProCurve 5400zl Reference Manual

Command Line Interface Reference Guide
Example: timesync sntp
Select SNTP as the time source and configure it with unicast mode and an SNTP server at 10.28.227.141
with the default server version (3) and default poll interval (720 seconds):
ProCurve(config)# timesync sntp
Example: time timezone daylight-time-rule
Set the time zone and daylight time rule for Vancouver, Canada:
ProCurve(config)# time timezone -480 daylight-time-rule continental-us-and-canada

COMMAND DETAILS

begin-date (p. 687)
date (p. 687)
begin-date
■ time begin-date MM/DD
The begin date of daylight savings time
date
■ time [DATE]
New date
daylight-time-rule
■ time daylight-time-rule < None | Alaska | Continental-US-and-Canada | ... >
The daylight savings time rule for your location
Supported Values:
■ None
■ Alaska
■ Continental-US-and-Canada
■ Middle-Europe-and-Portugal
■ Southern-Hemisphere
■ Western-Europe
■ User-defined
end-date
■ time end-date MM/DD
The end date of daylight savings time
time
■ time [TIME]
New time
timezone
■ time timezone < -720 to 840 >
© 2009 Hewlett-Packard Development Company, L.P.
daylight-time-rule (p. 687)
end-date (p. 687)
time (p. 687)
timezone (p. 687)
time
687