Jumbo; Overview; Notes; Command Structure - HP ProCurve 5400zl Reference Manual

OVERVIEW

Category:
Primary context:
Related Commands
Usage: jumbo ...
Description: Configure Global Jumbos parameters for the switch.

NOTES

Restriction on Value of max-frame-size
The value of max-frame-size must be greater than or equal to 18 bytes more than the value
selected for ip-mtu. For example, if ip-mtu is set to 8964, the max-frame-size is configured
as 8982.

COMMAND STRUCTURE

■ jumbo

ip-mtu
(p. 319)
■ jumbo max-frame-size
(p. 319)

COMMAND DETAILS

ip-mtu (p. 319)
ip-mtu
■ jumbo ip-mtu < 1500 to 9198 >
Usage: jumbo ip-mtu <1500-9198>
Description: Set the untagged Jumbos IP MTU or L3 MTU size for the switch.
Range: < 1500 to 9198 >
max-frame-size
■ jumbo max-frame-size < 1518 to 9216 >
Usage: jumbo max-frame-size <1518-9216>
Description: Set the untagged Jumbos Max frame size for the switch.
Range: < 1518 to 9216 >
© 2009 Hewlett-Packard Development Company, L.P.
config
the section called jumbos" (page 564)
< 1500 to 9198 > -- Set the untagged Jumbos IP MTU or L3 MTU size for the switch
< 1518 to 9216 > -- Set the untagged Jumbos Max frame size for the switch
max-frame-size (p. 319)
This value will be effective only when Jumbos are
enabled.
This value will be effective only when Jumbos are
enabled.
jumbo
319