HP ProCurve 5400zl Reference Manual page 414

Command Line Interface Reference Guide
ipv6 -- Specify range of TCP/UDP ports from [to] which to prioritize traffic.
■
port-num
■
dscp
■
■
■
■
priority
■
range
■
port-num
■
■
port-num
■
dscp
■
binary-range
■
integer-range
■
well-defined
■
(Differentiated-Services Codepoint) value and an 802
priority
■
range -- Specify range of TCP/UDP ports from [to] which to prioritize traffic.
■
port-num
■
max-port-num
■
(TCP/UDP-PORT)
■
■
■ [no] qos device-priority
ip-addr -- specify the ipv4 address of the device to set the priority (IP-ADDR)
■
dscp
■
binary-range
■
integer-range
■
well-defined
■
(Differentiated-Services Codepoint) value and an 802
priority
■
ipv4/mask
■
(IP-ADDR/mask-LENGTH)
dscp
■
binary-range
■
integer-range
■
© 2009 Hewlett-Packard Development Company, L.P.
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
■
(Differentiated-Services Codepoint) value and an 802
priority < 0 | 1 | 2 | ... > -- Specify priority to use.
■
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
< 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use.
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal.
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
(Differentiated-Services Codepoint) value and an 802
< 0 | 1 | 2 | ... > -- Specify priority to use.
-- Specify range of TCP/UDP ports from [to] which to prioritize traffic.
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
max-port-num -- Maximal TCP/UDP port in the range from [to] which to prioritize
traffic. (TCP/UDP-PORT)
dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use.
■
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
■
(p. 416)
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal.
■
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
■
(Differentiated-Services Codepoint) value and an 802
priority < 0 | 1 | 2 | ... > -- Specify priority to use.
■
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
< 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP
< 0 | 1 | 2 | ... > -- Specify priority to use.
-- TCP/UDP port from [to] which to prioritize traffic. (TCP/UDP-PORT)
-- Maximal TCP/UDP port in the range from [to] which to prioritize traffic.
(p. 425)
dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use.
binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
■
416)
integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal.
■
well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP
■
(Differentiated-Services Codepoint) value and an 802
priority < 0 | 1 | 2 | ... > -- Specify priority to use.
-- Configure device-based priority
-- Specify DSCP policy to use.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
< af11 | af12 | af13 | ... > -- Define mapping between a DSCP
< 0 | 1 | 2 | ... > -- Specify priority to use.
-- specify the ipv4 address with subnet mask of the device to set the priority
(p. 425)
-- Specify DSCP policy to use.
< 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY)
< 0 to 63 > -- Specify the DSCP code-point in decimal.
(p. 428)
(p. 425)
(p. 428)
(p. 417)
(p. 418)
(p. 428)
(p. 418)
(p. 434)
(p. 428)
(p. 425)
(p. 418)
(p. 423)
(p. 434)
(p. 432)
(p. 434)
(p. 428)
(p. 427)
(p. 418)
(p. 423)
(p. 434)
(p. 432)
(p. 418)
(p. 434)
(p. 428)
(p. 424)
(p. 423)
(p. 434)
(p. 423)
qos
(p. 427)
(p. 416)
(p. 427)
(p. 418)
(p. 423)
(p. 416)
(p. 427)
(p.
(p. 423)
(p. 416)
(p. 416)
412