Stack - HP ProCurve 5400zl Reference Manual

OVERVIEW
Category:
Primary context:
Related Commands
Usage: [no] stack
[no] stack commander ASCII-STR
[no] stack join MAC-ADDR
[no] stack member INTEGER mac-address MAC-ADDR [password ASCII-STR]
[no] stack auto-join
[no] stack auto-grab
Description: Configure device to/from a stack - a group of devices manageable
-
-
-
-
-
-
-
COMMAND STRUCTURE
■ [no] stack auto-grab
■ [no] stack auto-join
■ [no] stack commander
■ [no] stack join
■ [no] stack member
mac-address
■
password
■

■ stack

transmission-interval
© 2009 Hewlett-Packard Development Company, L.P.
config
stack transmission-interval <1-300>
as a single entity.
'stack' by itself enables stacking on the switch. The 'no' option
disables stacking.
'stack commander' configures the switch to be a 'commander switch'
given the name specified in the ASCII-STR parameter. The 'no'
option disables the commander function. The 'commander switch' can
be used as a single point of access for configuring and monitoring
all the switches in the stack.
'stack join' causes the switch, as a candidate switch, to join the
stack whose commander switch is identified by the MAC-ADDR
parameter. The 'no' option causes the switch to leave that stack.
'stack member' causes a candidate switch identified by the
MAC-ADDR to be an INTEGER-th member of this switch's stack in case
of this switch is a commander. The INTEGER number must be between
1 and 15 (0 is reserved for the commander switch). Password must
be supplied if the candidate switch has a manager password.
'stack auto-join' allows this switch, being a candidate, to
automatically join a stack. The 'no' option disables this feature.
'stack auto-grab' allows this switch, being a commander, to
automatically incorporate candidates. The 'no' option disables
this feature.
'stack transmission-interval' sets the transmission-interval (in
seconds) between the sending out of new discovery packets. The
default value is 60 seconds.
-- Configure commander to incorporate candidates
-- Allow this switch to automatically join a stack
-- Configure this switch to be a commander (ASCII-STR)
-- Join a stack as a member (MAC-ADDR)
-- Incorporate candidate into stack
-- MAC address of candidate (MAC-ADDR)
-- Manager password of candidate (ASCII-STR)
< 1 to 300 > -- Transmission interval of HP discovery packets
(p. 656)
(p. 656)
(p. 656)
(p. 656)
(p. 656)
(p. 656)
stack
(p. 656)
(p. 656)
655