HP ProCurve 5400zl Reference Manual page 559

Command Line Interface Reference Guide
Next Available Options:
vlan -- Show IGMP operational information for the VLAN specified. (VLAN-ID)
■
config -- Show IGMP configuration
■
group -- Show ports the specified multicast group address is registered on. (IP-ADDR)
■
igmp-proxy
■ show igmp-proxy
Usage: show igmp-proxy <entries|domains|vlans>
Description: Show active/configured IGMP proxy forwarder information.
Next Available Options:
entries -- Show all the currently active IGMP proxy
■
domains
■
vlans -- Show all the VLANs currently associated with IGMP proxy
■
INDEX
■ show filter INTEGER
Show detailed information for the filter identified by the INDEX.
The indices are displayed by the 'show filter' command.
info
■ show lldp info
Usage: show lldp info <local-device | remote device> [PORT-LIST]
Description: Show LLDP information about the remote or local device.
o [ethernet] PORT-LIST - Show local or remote device information
Next Available Options:
remote-device
■
local-device
■
information
■ show system information
Usage: show system information
Description: Show global configured and operational system parameters.
instance
■ show spanning-tree [ETHERNET] PORT-LIST config instance
© 2009 Hewlett-Packard Development Company, L.P.
When followed by the 'entries' keyword, shows all currently
active IGMP proxy entries. The 'domains' keyword can be
used to show all the currently configured IGMP proxy
domains. The 'vlans' keyword can be used to show all the
VLANs currently associated with IGMP proxy domains.
-- Show all the currently configured IGMP proxy
for the specified ports.
-- Show LLDP remote device
-- Show LLDP local device
information.(p. 540)
entries.(p. 550)
information.(p. 585)
information.(p. 566)
(p. 603)
domains.(p. 549)
domains.(p. 607)
show
(p. 553)
557