HP ProCurve 5400zl Reference Manual page 531

Command Line Interface Reference Guide
advertise
■ show ip ospf external-link-state advertise
Show each LSA as a stream of bytes in hexadecimal notation.
■ show ip ospf link-state advertise
Show each LSA as a stream of bytes in hexadecimal notation.
agent
■ show sflow agent
Displays read-only switch agent information: The agent address is normally the ip
address of the first vlan configured.
alias
■ show alias
Usage: show alias
Description: Show configured alias commands.
all
■ show rate-limit all
Show limits for all traffic.
Next Available Options:
port-list
■
detailed
■
■ show stack all
Show information about all the stacks available on the LAN.
■ show tech all
Usage: show tech [all|custom|buffers|instrumentation|mesh|route|statistics
Description: Display output of a predefined command sequence used by
all-hosts
■ show connection-rate-filter all-hosts
Show blocked and throttled IP addresses.
area
■ show ip ospf area
© 2009 Hewlett-Packard Development Company, L.P.
-- Specify ports for which information will be shown. ([ethernet] PORT-LIST)
-- Show Inbound Radius Override
|transceivers|vrrp]
technical support.
details.(p. 546)
show
(p. 578)
529