HP ProCurve 5400zl Reference Manual page 166

Command Line Interface Reference Guide
■ dhcp-relay option 82 keep mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
■ dhcp-relay option 82 drop mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
■ dhcp-relay option 82 validate append mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
■ dhcp-relay option 82 validate replace mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
■ dhcp-relay option 82 validate drop mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
option
■ [no] dhcp-relay option
Optional argument to dhcp-agent used to specify operational status for
DHCP options.
Next Available Option:
82 -- Optional argument to dhcp-agent used to specify the operational status for option
■
161)
replace
■ dhcp-relay option 82 replace
Specifies that any existing option 82 fields will be replaced with
switch option 82 field for client DHCP packet.
Next Available Options:
validate
■
mac -- Sets the remote id to be the MAC address of the switch. This is the default
■
ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
■
received.(p. 162)
mgmt-vlan
■
■ dhcp-relay option 82 validate replace
Specifies that any existing option 82 fields will be replaced with
switch option 82 field for client DHCP packet.
Next Available Options:
mac -- Sets the remote id to be the MAC address of the switch. This is the default
■
ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
■
received.(p. 162)
mgmt-vlan
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Specifies the validation for server
-- Sets the remote id to be the IP address of the Management
-- Sets the remote id to be the IP address of the Management
response.(p. 165)
dhcp-relay
82.(p.
value.(p. 163)
VLAN.(p. 163)
value.(p. 163)
VLAN.(p. 163)
164