HP ProCurve 5400zl Reference Manual page 126

Command Line Interface Reference Guide
usb -- Copy data to a USB flash
■
tftp
■ copy tftp
Copy data from a TFTP server.
Next Available Options:
command-file
■
flash -- Copy data to the switch system image
■
pub-key-file
■
startup-config
■
config -- Copy data to specified configuration file. (ASCII-STR)
■
autorun-cert-file
■
autorun-key-file
■
show-tech
■
■ copy command-output COMMAND-OUTPUT tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy config < config1 | config2 | config3 > tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy crash-data SLOT-ID-RANGE tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy crash-data mm tftp
Copy data to a TFTP server.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy crash-data tftp
© 2009 Hewlett-Packard Development Company, L.P.
-- Copy command script to switch and
-- Copy the public keys to the
-- Copy data to the switch configuration
-- Copy autorun trusted certificate to the
-- Copy autorun key file to the
-- Copy custom show-tech script to
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
drive.(p. 133)
execute.(p. 106)
file.(p. 116)
switch.(p. 122)
switch.(p. 105)
switch.(p. 123)
(p. 126)
(p. 126)
(p. 126)
(p. 126)
file.(p. 123)
(p. 106)
switch.(p. 105)
(p. 129)
(p. 129)
(p. 129)
(p. 129)
copy
124