HP ProCurve 5400zl Reference Manual page 567

Command Line Interface Reference Guide
lacp
■ show lacp
Usage: show lacp
Description: Show status of LACP trunks.
Next Available Option:
distributed
■
learned
■ show ip pim rp-set learned
Show RP-Set information learned from the BSR.
licenses
■ show licenses
Usage: show licenses [uninstalled]
Description: Display license status for premium features.
Next Available Option:
uninstalled
■
link-keepalive
■ show link-keepalive
Usage: show link-keepalive [statistics]
Description: show link-keepalive information on the switch.
Next Available Option:
statistics
■
link-state
■ show ip ospf link-state
Usage: show ip ospf link-state [OSPF-AREA-ID] [status|advertise]
Description: Show all Link State Advertisements from throughout
© 2009 Hewlett-Packard Development Company, L.P.
-- Show distributed lacp of local and remote
to display the uninstall verification key for features which
have been uninstalled.
-- Display verification key for features which have been uninstalled.
'show link-keepalive' command displays all the ports that are
enabled for link-keepalive. 'show link-keepalive statistics'
command displays detailed statistics like UDLD packets sent,
UDLD packets received etc for all link-keepalive enabled ports.
-- show detailed statistics for all link-keepalive enabled
the areas to which the device is attached.
The 'status' keyword is optional and does not affect the
command output. If the 'advertise' is specified, each LSA
is shown as a stream of bytes in hexadecimal notation.
switch(p. 549)
Use 'uninstalled'
ports.(p. 594)
show
(p. 601)
565