HP ProCurve 5400zl Reference Manual page 578

Command Line Interface Reference Guide
peer-ip
■ show ip rip peer IP-ADDR
Specify IP address of the RIP peer to show.
pending
■ show ip pim pending
Show (*,G) and (S,G) Join Pending Information.
■ show spanning-tree pending
Usage: show spanning-tree pending ...
Description: Show spanning tree pending configuration.
Next Available Options:
mst-config
■
instance
■
pim
■ show ip pim
Usage: show ip pim [command]
Description: Show PIM protocol operational and configuration information.
Next Available Options:
mroute -- Show PIM-specific information from the IP multicast routing
■
interface
■
neighbor
■
bsr -- Show Bootstrap Router
■
rp-candidate
■
rp-set -- Show RP-Set information available on the
■
rp-pending
■
pending
■
policy
■ show policy
Show policy config.
Next Available Options:
name -- Enter policy name. (ASCII-STR)
■
resources
■
© 2009 Hewlett-Packard Development Company, L.P.
Use 'show spanning-tree pending ?' to see a list of all
available options.
-- Show multiple spanning tree pending region
-- Show multiple spanning tree instance pending configuration
The 'command' can be used to obtain more detailed information
of the protocol functionality. Use 'show ip pim ?' to get a
list of all possible commands.
-- Show PIM interface
-- Show PIM neighbor
information(p. 535)
-- Show Candidate-RP operational and configuration
-- Show (*,*,RP) Join Pending Information.
-- Show (*,G) and (S,G) Join Pending Information.
-- Show the policy resources(p. 585)
information(p. 559)
information(p. 573)
router(p. 588)
(p. 572)
configuration.(p. 571)
information.(p. 557)
table(p. 571)
information(p. 588)
(p. 588)
(p. 576)
show
576