HP ProCurve 5400zl Reference Manual page 655

Command Line Interface Reference Guide
Enables or disables the PVST protection feature on the port or range of ports specified.
The
command indicates which ports are not expected to receive any PVST BPDUs.
Default: Disabled on all ports
reset
■ spanning-tree pending reset
Copy active configuration to pending.
root-guard
■ [no] spanning-tree [ETHERNET] PORT-LIST root-guard
Set port to ignore superior BPDUs to prevent it from becoming Root Port.
tcn-guard
■ [no] spanning-tree [ETHERNET] PORT-LIST tcn-guard
Set port to stop propagating received topology changes notifications
and topology changes to other ports.
trap
■ [no] spanning-tree trap < errant-bpdu >
Enable/disable STP traps.
Supported Values:
■ errant-bpdu
vlan
■ spanning-tree instance < 1 to 16 > vlan
Configure VLANs for the MST instance.
Next Available Option:
VLAN-ID-RANGE
■
(p. 653)
■ spanning-tree pending instance < 1 to 16 > vlan
Configure VLANs for the MST instance.
Next Available Option:
VLAN-ID-RANGE
■
(p. 653)
VLAN-ID-RANGE
■ [no] spanning-tree instance < 1 to 16 > vlan VLAN-ID-RANGE
VLAN(s) to add to or to remove from the MST instance
© 2009 Hewlett-Packard Development Company, L.P.
-- VLAN(s) to add to or to remove from the MST instance (VLAN-ID-RANGE)
-- VLAN(s) to add to or to remove from the MST instance (VLAN-ID-RANGE)
spanning-tree
653