HP ProCurve 5400zl Reference Manual page 591

Command Line Interface Reference Guide
sampling-polling
■ show sflow < 1 to 3 > sampling-polling
Displays information about sampling and polling.
Next Available Option:
port-list
■
savepower
■ show savepower
Usage: show savepower
Description: Shows the user configured block power status.
sec-model
■ show snmpv3 access-rights < ManagerPriv | ManagerAuth | OperatorAuth | ... > sec-model
Set security model.
Next Available Options:
ver1-2c < ver1 | ver2c > -- Configure SNMPv3 User
■
ver3 -- SNMP version 3 security
■
■ show snmpv3 group < ManagerPriv | ManagerAuth | OperatorAuth | ... > user USER sec-model
< ver1 | ver2c | ver3 >
Show a specific security model.
Supported Values:
■ ver1 -- SNMP version 1 security model.
■ ver2c -- SNMP version v2c security model.
■ ver3 -- SNMP version 3 security model.
sequence-number
■ show ip ospf external-link-state sequence-number INTEGER
Show LSAs with the specified sequence number only.
■ show ip ospf link-state sequence-number INTEGER
Show LSAs with the specified sequence number only.
services
■ show services
Usage: show services [<SLOT-ID> [details]]
Description: Show services information.
Parameters:
© 2009 Hewlett-Packard Development Company, L.P.
-- Displays information about sampling and polling. ([ethernet] PORT-LIST)
entry.(p. 602)
model.(p. 602)
show
(p. 578)
589