Command Line Interface Reference Guide
ip-addr
■
■
web-list1
■
([ethernet] PORT-LIST)
auth-vid
■
configured by default).
■
client-limit
■
1). (NUMBER)
client-moves
■
moves).
logoff-period
■
considers an implicit logoff (default 300 seconds). (NUMBER)
max-requests
■
authentication requests (default 3). (NUMBER)
max-retries
■
authentication is considered to have failed (default 3). (NUMBER)
quiet-period
■
authenticate (default 60 seconds). (NUMBER)
reauthenticate
■
reauth-period
■
'0' to disable re-authentication (default 0). (NUMBER)
redirect-url
■
(default none), Specify url up to 103 characters length.
■
server-timeout
■
30 seconds). (NUMBER)
ssl-login
■
unauth-vid
■
connected (not configured by default).
■
COMMAND DETAILS
accounting (p. 26)
active (p. 27)
addr-format (p. 27)
addr-limit (p. 27)
addr-moves (p. 27)
authentication (p. 27)
authenticator (p. 28)
authorization (p. 30)
auth-timeout (p. 30)
auth-vid (p. 30)
clear-statistics (p. 31)
client-limit (p. 31)
client-moves (p. 31)
commands (p. 31)
console (p. 32)
© 2009 Hewlett-Packard Development Company, L.P.
-- IP address of the enahced web auth server. (IP-ADDR)
page-path
-- Sets the path of the login pages to be found on the ewa server.
(ASCII-STR)
(p. 42)
-- Manage web authentication based network authentication on the device port(s).
(p. 57)
-- Configures VLAN where to move port after successful authentication (not
(p. 30)
web-authvid
-- Configures VLAN where to move port after successful authentication
(not configured by default). (VLAN-ID)
< 1 to 32 > -- Set the port's maximum number of authenticated clients (default
(p. 31)
-- Set whether the client can move between ports (default disabled - no
(p. 31)
< 1 to 9999999 > -- Set the period of time of inactivity that the switch
< 1 to 10 > -- Set maximum number of times the switch retransmits
< 1 to 10 > -- Set number of times a client can enter their credentials before
< 1 to 65535 > -- Set the period of time the switch does not try to
-- Force re-authentication to happen.
< 0 to 9999999 > -- Set the re-authentication timeout in seconds; set to
-- Set the URL that the user should be redirected to after successful login
web-redirect-url
-- Set the URL that the user should be redirected to after successful
login (default none), Specify url up to 103 characters length. (ASCII-STR)
< 1 to 300 > -- Set the authentication server response timeout (default
(p. 50)
-- Set whether to enable SSL login (https on port 443) (default disabled).
-- Configures VLAN where to keep port while there is an unauthorized client
web-unauthvid
-- Configures VLAN where to keep port while there is an unauthorized
client connected (not configured by default). (VLAN-ID)
identity (p. 35)
initialize (p. 35)
ip-addr (p. 35)
login (p. 36)
logoff-period (p. 36)
mac-based (p. 37)
mac-list1 (p. 39)
max-requests (p. 39)
max-retries (p. 39)
max-start (p. 40)
method (p. 40)
mode (p. 40)
network (p. 41)
null-username (p. 41)
num-attempts (p. 42)
(p. 55)
(p. 39)
(p. 47)
(p. 47)
(p. 47)
(p. 48)
(p. 53)
(p. 58)
reauth-period (p. 47)
redirect-url (p. 48)
secondary (p. 48)
secret (p. 50)
server-timeout (p. 50)
ssh (p. 50)
ssl-login (p. 50)
start-period (p. 51)
supplicant (p. 51)
supplicant-timeout (p. 52)
suppress (p. 52)
system (p. 52)
telnet (p. 52)
tx-period (p. 53)
unauth-period (p. 53)
aaa
(p. 35)
(p. 36)
(p. 39)
(p. 58)
(p. 50)
25