HP ProCurve 5400zl Reference Manual page 191

Command Line Interface Reference Guide
■ ip
■ ipx
■ arp
■ appletalk
■ sna
■ netbeui
Next Available Options:
forward
■
PORT-LIST)
drop -- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
■
PORT-LIST)
source-port
■ [no] filter source-port
Usage: [no] filter source-port [...]
Description: Specify source-port filter to manage.
Next Available Options:
named-filter
■
port-list
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
(p. 187)
(p. 186)
Create a named filter,associate source port-list to a
named-filter and apply actions.The named filter can only be 20
charactres long.If source port filter is not named,then
portname is considered as a filter name, and
received packet on port. If preceded by 'no' the command
deletes the filter specified.To delete a named-filter use
no filter source-port named-filter <filter-name> explicitly.
-- Set the filter name.(p. 188)
-- Set the list of source port filters. ([ethernet] PORT-LIST)
apply actions to
(p. 188)
filter
189