HP ProCurve 5400zl Reference Manual page 745

Command Line Interface Reference Guide
Range: < 0 to 255 >
■ vlan VLAN-ID qos priority < 0 | 1 | 2 | ... >
Specify priority to use.
Supported Values:
■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
■ vlan VLAN-ID vrrp vrid < 1 to 255 > priority < 1 to 255 >
Usage: vrrp vrid <VRID> priority <1-255>
Description: Configure priority for the virtual router instance.
Range: < 1 to 255 >
propagation-delay
■ vlan VLAN-ID ip pim-dense propagation-delay < 250 to 2000 >
Usage: ip pim-dense propagation-delay <250-2000>
Description: Set the value inserted into the LAN Prune Delay field of a
Range: < 250 to 2000 >
■ vlan VLAN-ID ip pim-sparse propagation-delay < 250 to 2000 >
Usage: ip pim-sparse propagation-delay <250-2000>
Description: Set the value inserted into the LAN Prune Delay field of a
Range: < 250 to 2000 >
protocol
■ vlan VLAN-ID protocol
Set a predefined protocol for the current VLAN.
Next Available Options:
protocols
■
protocol-group
■
(ASCII-STR)
protocol-group
■ [no] vlan VLAN-ID protocol PROTOCOL-GROUP
© 2009 Hewlett-Packard Development Company, L.P.
The default value is '100'.
LAN Prune Delay option on this interface. Default is 500
milliseconds.
LAN Prune Delay option on this interface. Default is 500
milliseconds.
< IPX | IPv4 | IPv6 | ... > -- Set a predefined protocol for the current VLAN.
-- Enter a list of protocols for the current VLAN delimited by commas.
(p. 743)
vlan
(p. 744)
743