HP ProCurve 5400zl Reference Manual page 112

Command Line Interface Reference Guide
Next Available Option:
cv_flash
■
■ copy tftp pub-key-file IP-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
append
■
operator
■
add the
manager
■
key(s).(p. 117)
■ copy tftp pub-key-file IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
append
■
operator
■
add the
manager
■
key(s).(p. 117)
■ copy tftp startup-config IP-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy tftp startup-config IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy tftp config CONFIG IP-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy tftp config CONFIG IPV6-ADDR FILENAME
© 2009 Hewlett-Packard Development Company, L.P.
< primary | secondary > -- Copy to primary/secondary
-- Add the key(s) for operator
-- Replace the key(s) for operator access (default); follow with the 'append' option to
key(s).(p. 119)
-- Replace the key(s) for manager access; follow with the 'append' option to add the
-- Add the key(s) for operator
-- Replace the key(s) for operator access (default); follow with the 'append' option to
key(s).(p. 119)
-- Replace the key(s) for manager access; follow with the 'append' option to add the
style.(p. 131)
style.(p. 120)
style.(p. 131)
style.(p. 120)
style.(p. 131)
style.(p. 120)
access.(p. 102)
access.(p. 102)
flash.(p. 107)
copy
110