HP ProCurve 5400zl Reference Manual page 715

Command line interface, switch software
Hide thumbs Also See for ProCurve 5400zl:
Table of Contents

Advertisement

Command Line Interface Reference Guide
forward (p. 724)
forward-protocol (p. 724)
full (p. 725)
graft-retry-interval (p. 725)
hello-delay (p. 725)
hello-interval (p. 725)
access-group
■ [no] vlan VLAN-ID ip access-group ACCESS-GROUP
Usage: [no] ip access-group <ACL-ID> <in|out>
in
out
vlan
connection-rate-filter Manage new conection rates originating in this VLAN
Description: Apply the specified access control list on this VLAN interface.
Next Available Option:
direction
■ [no] vlan VLAN-ID ipv6 access-group ACCESS-GROUP
Usage: [no] ipv6 access-group <name> vlan
Description: Apply a IPV6 ACl on a VLAN.
Parameters:
o name - ipv6 acl name.
o vlan - Apply the ipv6 acl as VLAN acl.
Next Available Option:
vlan
-- VLAN acl.
address
■ [no] vlan VLAN-ID ip address
Usage: [no] ip address [dhcp-bootp|IP-ADDR/mask-LENGTH]
Description: Set IP parameters for communication within an IP network.
Parameters:
© 2009 Hewlett-Packard Development Company, L.P.
nd (p. 737)
no-default (p. 737)
ns-interval (p. 737)
number (p. 738)
ospf (p. 738)
override-interval (p. 739)
owner (p. 739)
Match packets this device will route to another VLAN
Match packets this device will route onto this VLAN
Match packets that originate within this VLAN
The ACL can match either packets that are routed from this VLAN
to another VLAN, packets that will be routed from another VLAN
to this VLAN, packets that originate on this VLAN, or it can
manage new connection rates for virus throttling.Connection rate
filter ACLs should be applied as connection-rate-filter only.
< in | out | connection-rate-filter | ... > --
(p. 750)
Each VLAN represents an IP interface having its own unique
configuration.
The VLAN for which the configuration is
applied can be specified implicitly by preceding the
phrase 'ip address' with the 'vlan VLAN-ID' keyword and
argument.
It can also be called explicitly when called
directly from a VLAN context.
command affects the VLAN identified by the context.
voice (p. 750)
vrid (p. 751)
vrrp (p. 751)
well-defined (p. 752)
with-monitoring (p. 753)
(p. 722)
In the latter case the
vlan
713

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 3500ylProcurve 8200zl6200yl

Table of Contents