Reload - HP ProCurve 5400zl Reference Manual

OVERVIEW
Category:
Primary context:
Related Commands
Usage: [no] reload <after
Description: Warm reboot of the switch. If no parameters are entered,
Parameters:
o after
o at
COMMAND STRUCTURE

■ reload

after
■ reload at -- Warm reboot at a specified time; If the mm/dd/yy is left blank, the current day is
assumed. (p. 468)
time -- Time on given date to do a warm reboot. (HH:MM[:SS])
■
date
■
EXAMPLES
Example: reload
Automatically save your configuration changes and reboot the switch from the same flash image
you have been using:
ProCurve(config)# max-vlans 12
Command will take effect after saving configuration and reboot.
ProCurve(config)# reload
Device will be rebooted, do you want to continue [y/n]? y
Do you want to save current configuration [y/n]? y
COMMAND DETAILS
after (p. 467)
at (p. 468)
after
■ reload after [[DD:]HH:]MM
Warm reboot in a specified amount of time.
© 2009 Hewlett-Packard Development Company, L.P.
Switch Management
manager
boot (page 73)
<[[DD:]HH:]MM>
at HH:MM[:SS]
an immediate reload is executed.
[no] - Causes the removal of any pending reload request.
Note: The maximum allowable time is 99 days.
- Warm reboot the switch after the given amount of
time has passed.
- Warm reboot the switch at the given time.
-- Warm reboot in a specified amount of time. ([[DD:]HH:]MM)
-- Date on which a warm reboot is to occur. (MM/DD[/[YY]YY])
date (p. 468)
time (p. 468)
|
[MM/DD[/[YY]YY]>] >
reload
(p. 467)
(p. 468)
(p. 468)
467