HP ProCurve 5400zl Reference Manual page 111

Command Line Interface Reference Guide
Supported Values:
■ primary -- Copy image primary flash.
■ secondary -- Copy image secondary flash.
■ copy flash usb FILENAME < primary | secondary >
Copy from primary/secondary flash.
Supported Values:
■ primary -- Copy image primary flash.
■ secondary -- Copy image secondary flash.
event-log
■ copy event-log
Copy event log file.
Next Available Options:
tftp -- Copy data to a TFTP
■
xmodem
■
usb -- Copy data to a USB flash
■
filename
■ copy tftp command-file IP-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy tftp command-file IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Options:
unix -- Change CR/LF to unix
■
pc -- Change CR/LF to PC
■
■ copy tftp flash IP-ADDR FILENAME
Specify filename for the TFTP transfer.
Next Available Option:
cv_flash
■
■ copy tftp flash IPV6-ADDR FILENAME
Specify filename for the TFTP transfer.
© 2009 Hewlett-Packard Development Company, L.P.
server.(p. 124)
-- Use xmodem on the terminal as the data
style.(p. 131)
style.(p. 120)
style.(p. 131)
style.(p. 120)
< primary | secondary > -- Copy to primary/secondary
destination.(p. 135)
drive.(p. 133)
flash.(p. 107)
copy
109