HP ProCurve 5400zl Reference Manual page 589

Command Line Interface Reference Guide
Next Available Options:
cst -- Show CST Root changes
■
ist -- Show IST Regional Root changes
■
msti < 1 to 16 > -- Show MSTI Regional Root changes history. (NUMBER)
■
route
■ show ip route
Usage: show ip route [IP-ADDR] [static|connected|rip|ospf]
Description: Show the IP routing table.
Next Available Options:
ip-addr -- Destination IP address to display the routes to. (IP-ADDR)
■
type < static | connected | rip | ... > -- Specify type of routes to
■
■ show ipv6 route
Usage: show ipv6 route [IPV6-ADDR] [static|connected|ospf]
Description: Show the IPv6 routing table.
Next Available Options:
ipv6-addr
■
type < connected > -- Specify type of routes to
■
■ show tech route
Usage: show tech [all|custom|buffers|instrumentation|mesh|route|statistics
Description: Display output of a predefined command sequence used by
router-id
■ show ip ospf external-link-state router-id IP-ADDR
Show LSAs with the specified Router ID only.
■ show ip ospf link-state router-id IP-ADDR
Show LSAs with the specified Router ID only.
routers
■ show ipv6 routers
© 2009 Hewlett-Packard Development Company, L.P.
history.(p. 544)
The output may be restricted to a specific destination or
type of route.
The output may be restricted to a specific destination or
type of route.
-- Destination IPv6 address to display the routes to. (IPV6-ADDR)
|transceivers|vrrp]
technical support.
history.(p. 563)
display.(p. 600)
(p. 572)
(p. 561)
display.(p. 600)
(p. 563)
show
587