HP ProCurve 5400zl Reference Manual page 654

Command Line Interface Reference Guide
■ spanning-tree clear-debug-counters ports [ETHERNET] PORT-LIST
Clear spanning tree port(s) debug counters.
Next Available Option:
instance
■
priority
■ spanning-tree [ETHERNET] PORT-LIST priority < 0 to 15 >
Set port priority (the value is in range of 0-240 divided into steps of 16 that are
numbered from 0 to 15, default is step 8).
Range: < 0 to 15 >
■ spanning-tree [ETHERNET] PORT-LIST priority < 0 to 255 >
Set port priority (the value is in range of 0-240 divided into steps of 16 that are
numbered from 0 to 15, default is step 8).
Range: < 0 to 255 >
■ spanning-tree priority < 0 to 65535 >
Set the device STP priority.
Range: < 0 to 65535 >
■ spanning-tree priority < 0 to 15 >
Set the device STP priority (the value is in range of 0-61440 divided into steps of
4096 that are numbered from 0 to 15, default is step 8).
Range: < 0 to 15 >
■ spanning-tree instance < 1 to 16 > priority < 0 to 15 >
Set the device priority for the MST instance (the value is in range of 0-61440 divided
into steps of 4096 that are numbered from 0 to 15, default is step 8).
Range: < 0 to 15 >
■ spanning-tree instance < 1 to 16 > [ETHERNET] PORT-LIST priority < 0 to 15 >
Set the port priority for the instance (the value is in range of 0-240 divided into
steps of 16 that are numbered from 0 to 15, default is step 8).
Range: < 0 to 15 >
pvst-filter
■ [no] spanning-tree [ETHERNET] PORT-LIST pvst-filter
Stop a specific port or ports from receiving and retransmitting PVST BPDUs. The command
indicates
which ports are not expected to receive any PVST BPDUs.
Default: Disabled on all ports.
pvst-protection
■ [no] spanning-tree [ETHERNET] PORT-LIST pvst-protection
© 2009 Hewlett-Packard Development Company, L.P.
< 0 to 16 > -- Clear spanning tree instance debug counters. (NUMBER)
spanning-tree
(p. 643)
652