Filter; Overview; Command Structure - HP ProCurve 5400zl Reference Manual

OVERVIEW

Category:
Primary context:
Related Commands
Usage: [no] filter ...
Description: Set or edit traffic/security filters.

COMMAND STRUCTURE

■ [no] filter connection-rate
connection-rate-portlist
■
filter-action
■
■ [no] filter multicast
drop -- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
■
PORT-LIST)
forward
■
PORT-LIST)
■ [no] filter protocol
drop -- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
■
PORT-LIST)
forward
■
PORT-LIST)
■ [no] filter source-port
named-filter
■
ascii
■
drop
■
([ethernet] PORT-LIST)
forward
■
([ethernet] PORT-LIST)
port-list
■
drop
■
PORT-LIST)
forward
■
([ethernet] PORT-LIST)
forward
■
PORT-LIST)
drop
■
([ethernet] PORT-LIST)
named-filter
■
© 2009 Hewlett-Packard Development Company, L.P.
Troubleshooting
config
connection-rate-filter (page 90)
ip (page 290)
show (page 511)
show (page 511)
The command allows you to set conditional filters and
correspondent actions to apply to the incoming traffic
satisfying to the specified conditions.
Use 'filter ?' to get a list of all available
filter types.
-- Selects behavior for port(s) when a host is filtered
-- ([ethernet] PORT-LIST)
< block | notify-only | throttle > --
-- Specify multicast filter to manage (MAC-ADDR)
(p. 186)
-- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
(p. 187)
< ip | ipx | arp | ... > -- Specify protocol filter to manage
(p. 186)
-- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
(p. 187)
-- Specify source-port filter to manage
-- Set the filter name.
-- Set the filter name. (ASCII-STR)
-- Set a list of ports to which forwarding of filtered packets is not permitted.
(p. 186)
-- Set a list of ports to which forwarding of filtered packets is permitted.
(p. 187)
-- Set the list of source port filters. ([ethernet] PORT-LIST)
-- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
(p. 186)
-- Set a list of ports to which forwarding of filtered packets is permitted.
(p. 187)
-- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
(p. 187)
-- Set a list of ports to which forwarding of filtered packets is not permitted.
(p. 186)
-- Set the filter name. (ASCII-STR)
(p. 186)
(p. 187)
(p. 188)
(p. 186)
(p. 188)
(p. 186)
(p. 187)
(p. 188)
(p. 189)
(p. 188)

filter

185