HP ProCurve 5400zl Reference Manual page 237

Command Line Interface Reference Guide
Usage: vlan < vid > ipv6 mld forward < port-list >
Description: Instruct the device to forward incoming multicast packets
forward-protocol
■ interface vlan VLAN-ID ip forward-protocol
Usage: [no] ip forward-protocol udp IP-ADDR PORT-NUM|PORT-NAME
Description: Add or remove a UDP server address for the VLAN. The
Next Available Option:
udp -- Add or remove a UDP server address for the
■
full
■ [no] interface vlan VLAN-ID ipv6 address dhcp full
Obtain IPv6 address & Configuration information from DHCPv6 server.
Next Available Option:
rapid-commit
■
■ [no] interface svlan VLAN-ID ipv6 address dhcp full
Obtain IPv6 address & Configuration information from DHCPv6 server.
Next Available Option:
rapid-commit
■
graft-retry-interval
■ interface vlan VLAN-ID ip pim-dense graft-retry-interval < 1 to 10 >
Usage: ip pim-dense graft-retry-interval <1-10>
Description: Set the interval a PIM router waits for a Graft Ack before
Range: < 1 to 10 >
gvrp
■ interface [ETHERNET] PORT-LIST gvrp
Usage: gvrp [join-timer <n>][leave-timer <n>][leaveall-timer <n>]
Description: Set the GVRP timers on the port (hundredths of a second).
© 2009 Hewlett-Packard Development Company, L.P.
received on the specified ports.
configured on a per-VLAN basis.
broadcast packets received by the switch on this VLAN are to
be forwarded to the specified application server.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
-- Obtain IPv6 address quickly from DHCPv6
-- Obtain IPv6 address quickly from DHCPv6
resending a Graft on this interface. Default value is 3
seconds.
This feature is
VLAN(p. 280)
server.(p. 271)
server.(p. 271)
interface
235