HP ProCurve 5400zl Reference Manual page 301

Command Line Interface Reference Guide
Next Available Option:
domain-name
■
■ ip dns domain-name DOMAIN-NAME
Default domain suffix.
echo
■ [no] ip icmp echo
Usage: [no] ip icmp echo ...
Description: Enable/disable echo replies to broadcast echo requests.
Next Available Option:
broadcast-request
■
296)
extended
■ [no] ip access-list extended
Configure an extended Access Control List.
Next Available Options:
name -- Specify name of Access Control List to configure. (ASCII-STR)
■
number
■
fastleave
■ [no] ip igmp fastleave [ETHERNET] PORT-LIST
Usage: [no] ip igmp fastleave [ethernet] PORT-LIST
Description: Enables or disables IGMP Fast Leaves. When enabled, as soon as
filetransfer
■ [no] ip ssh filetransfer
Enable/disable secure file transfer capability.
forcedfastleave
■ [no] ip igmp forcedfastleave [ETHERNET] PORT-LIST
© 2009 Hewlett-Packard Development Company, L.P.
-- Default domain suffix. (ASCII-STR)
< Min | Max > -- Enable/disable echo replies to broadcast echo
< 100 to 199 > -- Specify Access Control List to configure by number.
an IGMP Group Leave has been received on a non-cascaded port,
the switch stops forwarding multicast traffic for that group
to that port.
Does not apply to cascaded ports (see ip igmp forcedfastleave).
When disabled, or when the port is cascaded, the regular IGMP
leave time is used (up to 10 seconds when the switch is not
the IGMP Querier).
The default behavior is for IGMP FastLeaves to be enabled.
This feature is configured for ports on a per-VLAN basis.
(p. 298)
(p. 304)
ip
requests(p.
(p. 305)
299