HP ProCurve 5400zl Reference Manual page 243

Command Line Interface Reference Guide
■ interface vlan VLAN-ID ip
Usage: [no] ip ...
Description: Configure various IP parameters for the VLAN. The 'ip'
Next Available Options:
access-group
■
214)
address
■
proxy-arp
■
local-proxy-arp
■
bootp-gateway
■
requests(p. 228)
helper-address
■
forward-protocol
■
igmp -- Enable/disable/configure IP Multicast Group Protocol (IGMP) feature on a
■
irdp -- Configure ICMP Router Discovery Protocol
■
ospf -- Enable/disable/configure Open Shortest Path First (OSPF) protocol on the VLAN
■
interface(p. 256)
rip -- Enable/disable/configure Routing Internet Protocol (RIP) on the VLAN
■
pim-dense
■
pim-sparse
■
mroute -- Configure IP Multicast Routing parameters on the VLAN
■
■ interface svlan VLAN-ID ip
Usage: [no] ip ...
Description: Configure various IP parameters for the VLAN. The 'ip'
Next Available Options:
access-group
■
214)
address
■
ip-addr
■ [no] interface loopback < 0 to 7 > ip address IP-ADDR
Interface IP address.
■ [no] interface loopback < 0 to 7 > ip ospf IP-ADDR
© 2009 Hewlett-Packard Development Company, L.P.
command must be followed by a feature-specific keyword.
Use 'ip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
-- Apply the specified access control list on this VLAN interface (ASCII-STR)
-- Set IP parameters for communication within an IP
-- Enable/disable proxy
-- Enable/disable local proxy
-- Add or remove the gateway address to be used for stamping incoming DHCP
-- Add or remove a DHCP server IP address for the VLAN (IP-ADDR)
-- Add or remove a UDP server address for the
-- Enable/disable/configure PIM-DM protocol on the VLAN
-- Enable/disable/configure PIM-SM protocol on the VLAN
command must be followed by a feature-specific keyword.
Use 'ip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
-- Apply the specified access control list on this VLAN interface (ASCII-STR)
-- Set IP parameters for communication within an IP
ARP(p. 268)
ARP(p. 248)
(IRDP)(p. 246)
network(p. 216)
VLAN(p. 235)
VLAN(p. 238)
interface(p. 274)
interface(p. 259)
interface(p. 259)
interface(p. 254)
network(p. 216)
interface
(p.
(p. 237)
(p.
241