HP ProCurve 5400zl Reference Manual page 288

Command Line Interface Reference Guide
■ af12
■ af13
■ af21
■ af22
■ af23
■ af31
■ af32
■ af33
■ af41
■ af42
■ af43
■ ef
■ cs0
■ cs1
■ cs2
■ cs3
■ cs4
■ cs5
■ cs6
■ cs7
■ interface vlan VLAN-ID qos dscp < af11 | af12 | af13 | ... >
Usage: [no] qos dscp-map <0|1...63|af11|af12|af13|af21|af22|af23|af31|af32|
Description: Define mapping between a DSCP (Differentiated-Services
© 2009 Hewlett-Packard Development Company, L.P.
af33|af41|af42|af43|ef|cs0..cs7|000000|000001...111111>|
[priority <<0-7>|no-override>]
[name <str>]
Codepoint) value and an 802.1p priority. The mapping is used
to assign priority for IPv4 packets if a QoS classifier uses
this DSCP policy as the method of traffic prioritization.
The mapping also provides the profile for inbound classification
and priority assignment based on an IPv4 packet's received
IP ToS byte ONLY IF the user has also configured
'qos type-of-service diff-services'
'no qos dscp-map <codepoint>' will remove the settings for the
specified codepoint from the running configuration.
priority is set to no-override and the name is deleted (the
priority and name can only be removed if no QoS feature is
configured to use this DSCP Policy).
'no qos dscp-map <codepoint> name'
associated with this policy, but not the policy priority.
Certain codepoints may have a default associated 802.1p
priority, as part of the IETF standards for Assured Forwarding
and Expedited Forwarding. These are automatically configured as
follows:
DiffServ 802.1p
Codepoint
---------------------------------------------------
001010
001100
001110
will remove the name
Value IETF Standard Designation
1 Assured Forwarding
1 Assured Forwarding
2 Assured Forwarding
interface
The
AF11
AF12
AF13
286