HP ProCurve 5400zl Reference Manual page 225

Command Line Interface Reference Guide
Single integer or IP address style dotted decimal.
■ interface vlan VLAN-ID ip ospf all area OSPF-AREA-ID
Single integer or IP address style dotted decimal.
arp-protect
■ interface [ETHERNET] PORT-LIST arp-protect
Usage: [no] arp-protect trust
Description: Configure the port as trusted or untrusted. ARP traffic received
Next Available Option:
trust -- (p. 279)
■
authentication
■ no interface vlan VLAN-ID ip ospf authentication
Disable authentication.
■ no interface vlan VLAN-ID ip ospf IP-ADDR authentication
Disable authentication.
■ no interface vlan VLAN-ID ip ospf all authentication
Disable authentication.
authentication-key
■ interface vlan VLAN-ID ip ospf authentication-key
Set simple authentication method and key.
Next Available Option:
authentication-key
■
■ interface vlan VLAN-ID ip ospf authentication-key OCTET-STR
OSPF authentication key (maximum 8 characters).
■ interface vlan VLAN-ID ip ospf IP-ADDR authentication-key
Set simple authentication method and key.
Next Available Option:
authentication-key
■
■ interface vlan VLAN-ID ip ospf IP-ADDR authentication-key OCTET-STR
© 2009 Hewlett-Packard Development Company, L.P.
on the untrusted interfaces of ARP Protection enabled VLANs
are validated against the set of known IP-to-MAC bindings
maintained by DHCP snooping. By specifying 'no' the port will
be configured as untrusted. The default state is untrusted.
-- OSPF authentication key (maximum 8 characters). (OCTET-STR)
-- OSPF authentication key (maximum 8 characters). (OCTET-STR)
interface
(p. 223)
(p. 223)
223