HP ProCurve 5400zl Reference Manual page 610

Command Line Interface Reference Guide
Next Available Options:
vlan -- Show detailed VLAN information for the VLAN with the ID supplied. (VLAN-ID)
■
ports -- Show VLANs that have at least one port from the 'PORT-LIST' as a member. ([ethernet]
■
PORT-LIST)
vlink-ip
■ show ip ospf virtual-link IP-ADDR
Router ID of the link destination for which to show detailed information.
vneighbor-ip
■ show ip ospf virtual-neighbor IP-ADDR
Router ID of the virtual neighbor for which to show detailed information.
vrid
■ show vrrp vlan VLAN-ID vrid
Show information for a virtual router.
Next Available Option:
VRID < 1 to 255 > -- Specify virtual router for which to display information.
■
VRID
■ show vrrp vlan VLAN-ID vrid < 1 to 255 >
Specify virtual router for which to display information.
Range: < 1 to 255 >
Next Available Options:
config -- Show virtual router configuration information.
■
statistics
■
vrrp
■ show tech vrrp
Usage: show tech [all|custom|buffers|instrumentation|mesh|route|statistics
Description: Display output of a predefined command sequence used by
■ show vrrp
© 2009 Hewlett-Packard Development Company, L.P.
If a 'VLAN-ID' is specified, shows the ports that are currently
members of the VLAN identified by the 'VLAN-ID'.
If a 'PORT-LIST' is specified, shows all the VLANs of which
at least one port in the 'PORT-LIST' is a member.
(p. 580)
-- Show virtual router statistics information.
|transceivers|vrrp]
technical support.
(p. 608)
(p. 540)
(p. 594)
show
(p. 603)
608