HP ProCurve 5400zl Reference Manual page 741

Command Line Interface Reference Guide
authentication
■
md5-auth-key-chain
■
cost < 1 to 65535 > -- Set metric of this
■
dead-interval
■
hello-interval
■
priority < 0 to 255 > -- Set priority of this router as a designated
■
retransmit-interval
■
transit-delay
■
ip-addr -- Specify the IP address the request is for. (IP-ADDR)
■
all -- Process the request for all IP
■
override-interval
■ vlan VLAN-ID ip pim-dense override-interval < 500 to 6000 >
Usage: ip pim-dense override-interval <500-6000>
Description: Set the value inserted into the Override Interval field of
Range: < 500 to 6000 >
■ vlan VLAN-ID ip pim-sparse override-interval < 500 to 6000 >
Usage: ip pim-sparse override-interval <500-6000>
Description: Set the value inserted into the Override Interval field of
Range: < 500 to 6000 >
owner
■ vlan VLAN-ID vrrp vrid < 1 to 255 > owner
Usage: vrrp vrid <VRID> owner
Description: Designate the virtual router instance as an Owner (Master).
passive
■ [no] vlan VLAN-ID ip ospf passive
Configures an ospf interface as passive.
■ [no] vlan VLAN-ID ip ospf IP-ADDR passive
Configures an ospf interface as passive.
■ [no] vlan VLAN-ID ip ospf all passive
Configures an ospf interface as passive.
pim-dense
■ [no] vlan VLAN-ID ip pim-dense
© 2009 Hewlett-Packard Development Company, L.P.
-- Disable authentication.(p. 717)
-- Set MD5 authentication method and key
< 1 to 65535 > -- Set dead interval in seconds; the default is
< 1 to 65535 > -- Set hello interval in seconds; the default is
< 1 to 3600 > -- Set retransmit interval in seconds; the default is
< 1 to 3600 > -- Set transit delay in seconds; the default is
a LAN Prune Delay option on this interface. Default is 2500
milliseconds.
a LAN Prune Delay option on this interface. Default is 2500
milliseconds.
There is no default value.
interface.(p. 721)
addresses.(p. 715)
chain.(p. 734)
40.(p. 721)
10.(p. 725)
router.(p. 742)
5.(p. 746)
1.(p. 749)
(p. 729)
vlan
739