Command Line Interface Reference Guide
■ show
config
filename
■
files
-- List saved configuration files.
■
status
-- Check if the running configuration differs from the statup configuration.
■
■ show
connection-rate-filter
(p. 543)
all-hosts
■
blocked-hosts
■
throttled-hosts
■
■ show
console
■ show
cpu
-- Show average CPU utilization over the last 1, 5, and 60 seconds; or the number of
seconds specified
slot
-- Display module CPU statistics. (SLOT-ID-RANGE)
■
slave_time
■
(p. 591)
time
< 1 to 300 > -- Time (seconds) over which to average CPU utilization. (NUMBER)
■
■ show
crypto
autorun-cert
■
autorun-key
■
client-public-key
■
babble
■
fingerprint
■
keyfile
■
babble
■
fingerprint
■
keylist
■
■
■
host-cert
■
host-public-key
■
babble
■
fingerprint
■
■ show
debug
buffer
-- Show the contents of the debug log buffer
■
-c
-- Stop after displaying <count> messages. (NUMBER)
■
option
■
574)
-r
-- Display messages in reverse order (most recent first).
■
■ show
dhcp-relay
Gateway for configured interfaces
bootp-gateway
■
vlan
-- Show the configured BOOTP Gateway for VLAN.
■
vlan
■
■ show
dhcp-snooping
binding
■
stats
-- Display DHCP snooping events.
■
■ show
fastboot
■ show
fault-finder
■ show
feature-coordinator
■ show
filter
-- Show a table of security filters or a filter detailed information, if the filter's INDEX is
specified
(p. 552)
INDEX
-- Show detailed information for the filter identified by the INDEX. The indices are
■
displayed by the 'show filter' command.
© 2009 Hewlett-Packard Development Company, L.P.
-- Show the switch startup configuration
< config | config1 > -- Display specified configuration.
-- List the ports and the on/off connection-rate-filter status and sensitivity
-- Show blocked and throttled IP addresses.
-- Show blocked IP addresses.
-- Show throttled IP addresses.
-- Show serial link/console settings
(p. 543)
< 1 to 90 > -- Time (seconds) over which to average CPU utilization. (NUMBER)
-- Display flash files used for authentication
-- Display trusted certificate.
-- Display autorun key.
-- Display ssh authorized client public keys.
-- Display phonetic hash.
-- Display hexadecimal hash.
< manager | operator > -- Choose to display manager or operator keys.
-- Display phonetic hash.
-- Display hexadecimal hash.
-- Select keys to display (comma-delimited list). (ASCII-STR)
babble
-- Display phonetic hash.
fingerprint
-- Display hexadecimal hash.
-- Display https certificate information.
-- Display ssh host RSA public key.
-- Display phonetic hash.
-- Display hexadecimal hash.
-- Display currently active debug log destinations and types
-- Filter messages shown to those matching a string up to 64 chars. (ASCII-STR)
-- Shows the current status of DHCP Relay Agent, option 82 statistics and BOOTP
-- Show the configured BOOTP gateway for configured interfaces
-- (VLAN-ID)
(p. 603)
-- Display DHCP snooping information
-- Display DHCP snooping binding information.
-- Shows the current status of fastboot on switch
-- Show the fault-finder table
-- Display the feature coordination restrictions
(p. 540)
(p. 551)
(p. 529)
(p. 534)
(p. 599)
(p. 543)
(p. 533)
(p. 533)
(p. 533)
(p. 552)
(p. 533)
(p. 552)
(p. 533)
(p. 552)
(p. 555)
(p. 555)
(p. 533)
(p. 552)
(p. 535)
(p. 548)
(p. 596)
(p. 551)
(p. 557)
(p. 551)
(p. 591)
(p. 544)
(p. 537)
(p. 564)
(p. 545)
(p. 536)
(p. 583)
(p. 603)
(p. 548)
(p. 534)
(p. 551)
(p. 551)
show
(p. 596)
(p. 599)
(p. 564)
(p.
(p. 534)
512