HP ProCurve 5400zl Reference Manual page 107

Command Line Interface Reference Guide
autorun-cert-file
■ copy tftp autorun-cert-file
Copy autorun trusted certificate to the switch.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy usb autorun-cert-file
Copy autorun trusted certificate to the switch.
Next Available Option:
filename
■
autorun-key-file
■ copy tftp autorun-key-file
Copy autorun key file to the switch.
Next Available Options:
tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR)
■
tftp-ipv6
■
■ copy usb autorun-key-file
Copy autorun key file to the switch.
Next Available Option:
filename
■
card
■ copy crash-data SLOT-ID-RANGE
Enter single slot identifier.
Next Available Options:
tftp -- Copy data to a TFTP
■
xmodem
■
usb -- Copy data to a USB flash
■
■ copy crash-log SLOT-ID-RANGE
Enter single slot identifier.
Next Available Options:
tftp -- Copy data to a TFTP
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify filename for the USB transfer. (ASCII-STR)
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify filename for the USB transfer. (ASCII-STR)
server.(p. 124)
-- Use xmodem on the terminal as the data
server.(p. 124)
(p. 126)
(p. 126)
destination.(p. 135)
drive.(p. 133)
(p. 129)
(p. 109)
(p. 129)
(p. 109)
copy
105