HP ProCurve 5400zl Reference Manual page 171

Command Line Interface Reference Guide
Next Available Option:
82 -- (p. 166)
■
port-list
■ [no] dhcp-snooping trust [ETHERNET] PORT-LIST
remote-id
■ dhcp-snooping option 82 remote-id < mac | subnet-ip | mgmt-ip >
Set relay information option remote-id value to use.
Supported Values:
■ mac -- switch MAC address.
■ subnet-ip -- subnet VLAN IP address.
■ mgmt-ip -- management VLAN IP address.
timeout
■ dhcp-snooping database timeout < 0 to 86400 >
Seconds to wait for the transfer before failing.
Range: < 0 to 86400 >
trust
■ [no] dhcp-snooping trust
Usage: [no] dhcp-snooping trust PORT-LIST
Description: Configure trusted interfaces. Only server packets received
Parameters:
o PORT-LIST - Port list on which to configure trust status.
Next Available Option:
port-list
■
untrusted-policy
■ dhcp-snooping option 82 untrusted-policy < drop | keep | replace >
Policy for DHCP packets received on untrusted ports thatcontain option 82.
Supported Values:
■ drop -- drop the packet.
■ keep -- forward the packet unchanged.
■ replace -- generate new option.
verify
■ [no] dhcp-snooping verify
© 2009 Hewlett-Packard Development Company, L.P.
on trusted interfaces will be forwarded. When 'no' is
specified the interfaces are marked as untrusted.
The default port state is untrusted.
-- ([ethernet] PORT-LIST) (p. 169)
dhcp-snooping
169