Command Line Interface Reference Guide
■ [no] spanning-tree pending instance < 1 to 16 >
ID of the MST instance to configure.
Range: < 1 to 16 >
Next Available Option:
vlan
-- Configure VLANs for the MST
■
path-cost
■ spanning-tree [ETHERNET] PORT-LIST path-cost
Set port's path cost value.
Next Available Options:
path-cost
■
path-cost
■
auto
-- Use dynamic method of selecting a value for the path
■
■ spanning-tree [ETHERNET] PORT-LIST path-cost < 1 to 200000000 >
Set port's path cost to the fixed value.
Range: < 1 to 200000000 >
■ spanning-tree [ETHERNET] PORT-LIST path-cost < 1 to 65535 >
Set port's path cost to the fixed value.
Range: < 1 to 65535 >
■ spanning-tree [ETHERNET] PORT-LIST path-cost
Set port's path cost value.
Next Available Options:
path-cost
■
path-cost
■
auto
-- Use dynamic method of selecting a value for the path
■
■ spanning-tree [ETHERNET] PORT-LIST path-cost < 1 to 200000000 >
Set port's path cost to the fixed value.
Range: < 1 to 200000000 >
■ spanning-tree [ETHERNET] PORT-LIST path-cost < 1 to 65535 >
Set port's path cost to the fixed value.
Range: < 1 to 65535 >
■ spanning-tree instance ist [ETHERNET] PORT-LIST path-cost
Set the internal port pathcost for the IST (default is 'auto').
© 2009 Hewlett-Packard Development Company, L.P.
< 1 to 200000000 > -- Set port's path cost to the fixed
< 1 to 65535 > -- Set port's path cost to the fixed
< 1 to 200000000 > -- Set port's path cost to the fixed
< 1 to 65535 > -- Set port's path cost to the fixed
instance.(p. 653)
value.(p. 646)
value.(p. 646)
spanning-tree
value.(p. 646)
cost.(p. 641)
value.(p. 646)
cost.(p. 641)
646