Command Line Interface Reference Guide
Copy data to a USB flash drive.
Next Available Option:
filename
■
■ copy event-log usb
Copy data to a USB flash drive.
Next Available Option:
filename
■
xmodem
■ copy xmodem
Use xmodem on the terminal as the data source.
Next Available Options:
flash
-- Copy to primary/secondary
■
startup-config
■
command-file
■
config
-- Copy data to specified configuration file. (ASCII-STR)
■
■ copy command-output COMMAND-OUTPUT xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
unix
-- Change CR/LF to unix
■
pc
-- Change CR/LF to PC
■
■ copy config < config1 | config2 | config3 > xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
unix
-- Change CR/LF to unix
■
pc
-- Change CR/LF to PC
■
■ copy crash-data SLOT-ID-RANGE xmodem
Use xmodem on the terminal as the data destination.
■ copy crash-data mm xmodem
Use xmodem on the terminal as the data destination.
■ copy crash-data xmodem
Use xmodem on the terminal as the data destination.
© 2009 Hewlett-Packard Development Company, L.P.
-- Specify filename for the USB transfer. (ASCII-STR)
-- Specify filename for the USB transfer. (ASCII-STR)
-- Copy data to the switch configuration
-- Copy command script to switch and
style.(p. 131)
style.(p. 120)
style.(p. 131)
style.(p. 120)
flash.(p. 116)
file.(p. 123)
execute.(p. 106)
(p. 109)
(p. 109)
(p. 106)
copy
135