HP ProCurve 5400zl Reference Manual page 704

Command Line Interface Reference Guide
■ Trk24 -- Trunk group 24
■ Trk25 -- Trunk group 25
■ Trk26 -- Trunk group 26
■ Trk27 -- Trunk group 27
■ Trk28 -- Trunk group 28
■ Trk29 -- Trunk group 29
■ Trk30 -- Trunk group 30
■ Trk31 -- Trunk group 31
■ Trk32 -- Trunk group 32
■ Trk33 -- Trunk group 33
■ Trk34 -- Trunk group 34
■ Trk35 -- Trunk group 35
■ Trk36 -- Trunk group 36
■ Trk37 -- Trunk group 37
■ Trk38 -- Trunk group 38
■ Trk39 -- Trunk group 39
■ Trk40 -- Trunk group 40
■ Trk41 -- Trunk group 41
■ Trk42 -- Trunk group 42
■ Trk43 -- Trunk group 43
■ Trk44 -- Trunk group 44
■ Trk45 -- Trunk group 45
■ Trk46 -- Trunk group 46
■ Trk47 -- Trunk group 47
■ Trk48 -- Trunk group 48
■ Trk49 -- Trunk group 49
■ Trk50 -- Trunk group 50
■ Trk51 -- Trunk group 51
■ Trk52 -- Trunk group 52
■ Trk53 -- Trunk group 53
■ Trk54 -- Trunk group 54
■ Trk55 -- Trunk group 55
■ Trk56 -- Trunk group 56
■ Trk57 -- Trunk group 57
■ Trk58 -- Trunk group 58
■ Trk59 -- Trunk group 59
■ Trk60 -- Trunk group 60
Next Available Option:
type < Trunk | LACP | dt-lacp | ... > -- Specify protocol to use on a manually configured trunk.
■
(p. 702)
type
■ trunk [ETHERNET] PORT-LIST < Trk1 | Trk2 | Trk3 | ... > < Trunk | LACP | | ... >
Specify protocol to use on a manually configured trunk.
Supported Values:
■ Trunk -- Do not use any protocol to create or maintain the trunk.
■ LACP -- Use IEEE 802.1ad Link Aggregation protocol.
© 2009 Hewlett-Packard Development Company, L.P.
trunk
702