HP ProCurve 5400zl Reference Manual page 747

Command line interface, switch software
Hide thumbs Also See for ProCurve 5400zl:
Table of Contents

Advertisement

Command Line Interface Reference Guide
Next Available Option:
interval
■ [no] vlan VLAN-ID ipv6 mld querier
Usage: [no] vlan < vid > ipv6 mld querier
Description: This command disables or re-enables the ability for the switch
rapid-commit
■ [no] vlan VLAN-ID ipv6 address dhcp full rapid-commit
Obtain IPv6 address quickly from DHCPv6 server.
reachable-time
■ [no] vlan VLAN-ID ipv6 nd reachable-time
Usage: [no] ipv6 nd reachable-time
Description: Configures the length of time neighbors are considered
Next Available Option:
number
738)
receive
■ vlan VLAN-ID ip rip receive < V1-only | V2-only | V1-or-V2 | ... >
Define RIP version for incoming packets.
Supported Values:
■ V1-only -- Accept RIP version 1 updates only.
■ V2-only -- Accept RIP version 2 updates only.
■ V1-or-V2 -- Accept both RIP 1 and RIP 2 updates.
■ disabled -- Do not accept RIP updates.
■ vlan VLAN-ID ip rip IP-ADDR receive < V1-only | V2-only | V1-or-V2 | ... >
Define RIP version for incoming packets.
© 2009 Hewlett-Packard Development Company, L.P.
enabled, the device cannot become Querier for the subnet
unless the VLAN has an IP Address (use the 'show ip' command
to determine this).
Querier-capable device in order for IGMP to function
properly.
The querier interval setting modifies the time (in
seconds) between IGMP queries.
< 5 to 300 > -- Sets the interval in seconds between IGMP queries (default: 125)
to become querier if necessary. The no version of the command
disables the querier function on the switch.
The show ipv6 mld config command displays the current querier
command. (Default Querier Capability: Enabled.)
reachable after being confirmed as reachable via the
neighbor unreachability detection algorithm.
appears in router advertisements sent on this interface and
is also used to manage the neighbor table entries on this node.
< 1000 to 3600000 > -- Configures the router lifetime sent in router
Each subnet must have at least one IGMP
<milliseconds>
(p. 728)
This value
advertisements(p.
vlan
745

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 3500ylProcurve 8200zl6200yl

Table of Contents