HP ProCurve 5400zl Reference Manual page 728

Command Line Interface Reference Guide
■ vlan VLAN-ID ip ospf IP-ADDR hello-interval < 1 to 65535 >
Set hello interval in seconds; the default is 10.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip ospf all hello-interval < 1 to 65535 >
Set hello interval in seconds; the default is 10.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip pim-dense hello-interval < 5 to 300 >
Usage: ip pim-dense hello-interval <5-300>
Description: Set the frequency at which PIM Hello messages are transmitted
Range: < 5 to 300 >
■ vlan VLAN-ID ip pim-sparse hello-interval < 5 to 300 >
Usage: ip pim-sparse hello-interval <5-300>
Description: Set the frequency at which PIM Hello messages are transmitted
Range: < 5 to 300 >
helper-address
■ [no] vlan VLAN-ID ip helper-address IP-ADDR
Usage: [no] ip helper-address IP-ADDR
Description: Add or remove a DHCP server IP address for the VLAN. The
high-priority-forward
■ [no] vlan VLAN-ID ip igmp high-priority-forward
Usage: [no] ip igmp high-priority-forward
Description: Enable/disable the high priority forwarding of traffic for
holdtime
■ vlan VLAN-ID ip irdp holdtime < 4 to 9000 >
Usage: [no] ip irdp holdtime <4-9000>
Description: Set the lifetime (in seconds) of the router advertisements sent
Range: < 4 to 9000 >
© 2009 Hewlett-Packard Development Company, L.P.
on this interface. Default value is 30 seconds.
on this interface. Default value is 30 seconds.
DHCP requests received by the switch on this VLAN are to
be relayed to the specified DHCP server.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
subscribed IP Multicast groups. This feature is configured on
a per-VLAN basis.
on this interface. Must be no less than the maximum time
allowed between sending unsolicited router advertisements.
vlan
726