HP ProCurve 5400zl Reference Manual page 649

Command Line Interface Reference Guide
Next Available Options:
path-cost
■
auto -- Use dynamic method of selecting a value for the path
■
■ spanning-tree instance ist [ETHERNET] PORT-LIST path-cost < 1 to 200000000 >
Set port's path cost to the fixed value.
Range: < 1 to 200000000 >
■ spanning-tree instance < 1 to 16 > [ETHERNET] PORT-LIST path-cost
Set the port pathcost for the instance (default is 'auto').
Next Available Options:
path-cost
■
auto -- Use dynamic method of selecting a value for the path
■
■ spanning-tree instance < 1 to 16 > [ETHERNET] PORT-LIST path-cost < 1 to 200000000 >
Set port's path cost to the fixed value.
Range: < 1 to 200000000 >
pending
■ spanning-tree pending
Usage: spanning-tree pending <apply|reset>
[no] spanning-tree pending [...]
Description: Manipulate pending MSTP configuration. The pending
Next Available Options:
apply -- Apply pending MSTP configuration (swaps active and pending
■
reset -- Copy active configuration to
■
config-name
■
address).(p. 642)
config-revision
■
(default is
instance
■
© 2009 Hewlett-Packard Development Company, L.P.
< 1 to 200000000 > -- Set port's path cost to the fixed
< 1 to 200000000 > -- Set port's path cost to the fixed
configuration can be modified without affecting current
spanning tree operation. The 'spanning-tree pending apply'
command runs the pending configuration consistency check
and activates the pending configuration if it yields no
consistency errors. The pending and active configurations
exchange places if the 'apply' command is completed
successfully.
The 'spanning-tree pending reset' command overrides pending
configuration with the active one.
Not all spanning tree parameters are available for the pending
configuration. The parameters that are not available for the
pending configuration are not affected or when must be
implicitly set are initialized to the defaults. Use
'spanning-tree pending ?' to get a complete list of all
supported pending configuration commands and parameters.
-- Set the pending MST region configuration name (default is switch's MAC
< 0 to 65535 > -- Set the pending MST region configuration revision number
0).(p. 642)
-- Change pending MST instance
pending.(p. 653)
configuration.(p. 643)
spanning-tree
value.(p. 646)
cost.(p. 641)
value.(p. 646)
cost.(p. 641)
configuratons).(p. 641)
647