OVERVIEW
Category:
Primary context:
Related Commands
Usage: [no] snmpv3 <community|group|notify|params|restricted-access|
Description: Configure SNMPv3 features.
NOTES
IPv6 Supported Commands
IPv6 addressing is supported for the following commands:
■ snmpv3 targetaddress <name> params <params-name>
for
■ addr-mask <ip-addr>
■ filter <none | debug | all | not-info | critical>
■ max-msg-size <484 - 65535>
■ port-mask <tcp-udp port>
■ retries <0-255>
■ taglist <tag-name>
■ timeout <0 - 2147483647>
■ udp-port-number <port-number>
COMMAND STRUCTURE
■ [no] snmpv3
index
-- Set community index. (ASCII-STR)
■
name
■
sec-name
■
■
■ [no] snmpv3
■ [no] snmpv3
■ [no] snmpv3
User to Group entry.
user
-- Set user to be added to the group. (ASCII-STR)
■
sec-model
■
■ [no] snmpv3
© 2009 Hewlett-Packard Development Company, L.P.
config
show snmpv3 (page 591)
show snmp-server (page 591)
targetaddress|user>
community
-- Configure SNMPv3 Community entry.
-- Set community name. (ASCII-STR)
-- Set security name. (ASCII-STR)
tag
-- Set tag value for the community (ASCII-STR)
enable
-- Enable SNMPv3.
engineid
-- Configure SNMPv3 engineID. (ASCII-STR)
group
< ManagerPriv | ManagerAuth | OperatorAuth | ... > -- Configure SNMPv3
(p. 627)
< ver1 | ver2c | ver3 > -- Set security model to be used.
notify
-- Configure SNMPv3 Notification entry. (ASCII-STR)
(p. 627)
(p. 628)
(p. 631)
(p. 626)
(p. 632)
snmpv3
(p. 626)
(p. 631)
(p. 626)
(p. 631)
(p. 628)
623