HP ProCurve 5400zl Reference Manual page 287

Command line interface, switch software

Hide thumbs Also See for ProCurve 5400zl:

Table of Contents

Command Line Interface Reference Guide

well-defined

■ interface [ETHERNET] PORT-LIST qos dscp < af11 | af12 | af13 | ... >

Usage: [no] qos dscp-map <0|1...63|af11|af12|af13|af21|af22|af23|af31|af32|

Description: Define mapping between a DSCP (Differentiated-Services

Supported Values:

af33|af41|af42|af43|ef|cs0..cs7|000000|000001...111111>|

[priority <<0-7>|no-override>]

[name <str>]

Codepoint) value and an 802.1p priority. The mapping is used

to assign priority for IPv4 packets if a QoS classifier uses

this DSCP policy as the method of traffic prioritization.

The mapping also provides the profile for inbound classification

and priority assignment based on an IPv4 packet's received

IP ToS byte ONLY IF the user has also configured

'qos type-of-service diff-services'

'no qos dscp-map <codepoint>' will remove the settings for the

specified codepoint from the running configuration.

priority is set to no-override and the name is deleted (the

priority and name can only be removed if no QoS feature is

configured to use this DSCP Policy).

'no qos dscp-map <codepoint> name'

associated with this policy, but not the policy priority.

Certain codepoints may have a default associated 802.1p

priority, as part of the IETF standards for Assured Forwarding

and Expedited Forwarding. These are automatically configured as

---------------------------------------------------

will remove the name

IETF Standard Designation

Assured Forwarding

Expedited Forwarding EF

Classs Selector

Procurve 3500yl Procurve 8200zl 6200yl