Command Line Interface Reference Guide
public-key
■ ip ssh public-key < manager | operator >
Configure a client public-key.
Supported Values:
■ manager -- Select manager public keys.
■ operator -- Select operator public keys.
Next Available Option:
keystring
■
querier
■ [no] ip igmp querier
Usage: [no] ip igmp querier [interval <seconds>]
Description: Specify querier/non-querier capability for the VLAN. IGMP
Next Available Option:
interval
■
redirects
■ [no] ip icmp redirects
Usage: [no] ip icmp redirects
Description: Enable/disable redirect error messages.
reject
■ [no] ip route IP-ADDR/MASK-LENGTH reject
Specify that packets are discarded and ICMP error is returned to sender.
Next Available Option:
distance
■
298)
reply-limit
■ [no] ip icmp reply-limit
© 2009 Hewlett-Packard Development Company, L.P.
-- ASCII formatted public-key. (ASCII-STR)
queries are not sent when the mode is disabled. When
enabled, the device cannot become Querier for the subnet
unless the VLAN has an IP Address (use the 'show ip' command
to determine this).
Querier-capable device in order for IGMP to function
properly.
The querier interval setting modifies the time (in
seconds) between IGMP queries.
< 5 to 300 > -- Sets the interval in seconds between IGMP queries (default: 125)
< 1 to 255 > -- Set the administrative distance to associate with this static
(p. 303)
Each subnet must have at least one IGMP
ip
(p. 301)
route.(p.
306