HP ProCurve 5400zl Reference Manual page 256

Command Line Interface Reference Guide
Next Available Option:
all < In | Out | Both > -- Monitor all
■
monitor_mirror_session_id
■ [no] interface [ETHERNET] PORT-LIST monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
Next Available Option:
no-tag-added
■
■ [no] interface vlan VLAN-ID monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
■ [no] interface svlan VLAN-ID monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
mroute
■ interface vlan VLAN-ID ip mroute
Usage: ip mroute ...
Description: Configure IP Multicast Routing parameters on the VLAN
Next Available Option:
ttl-threshold
■
name
■ [no] interface [ETHERNET] PORT-LIST name
Usage:
no name
Description: Set/unset a name for the port(s).
© 2009 Hewlett-Packard Development Company, L.P.
destination number.
o ACL-NAME - Standard or Extended Access Control List number.
o <in|out|both> direction of the traffic to be monitored.
-- Don't add VLAN tag for this
interface. The command must be followed by a parameter.
Use 'ip mroute ?' to get a list of all possible parameters.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
< 0 to 255 > -- Set the multicast datagram TTL threshold for the
name PORT-NAME-STR
This is an Interface context command. It can be called directly
from the interface context or follow the 'interface [ethernet]
PORT-LIST' command.
traffic.(p. 219)
untagged-port(p. 256)
interface
interface(p. 279)
254