HP ProCurve 5400zl Reference Manual page 485

Command Line Interface Reference Guide
■ router ospf area backbone nssa < 0 to 16777215 > no-summary
Do not send summary LSA into the area.
■ router ospf area backbone stub no-summary
Do not send summary LSA into the area.
nssa
■ router ospf area OSPF-AREA-ID nssa < 0 to 16777215 >
Define a "not-so-stubby" area (or NSSA) and its cost.
Range: < 0 to 16777215 >
Next Available Options:
metric-type
■
no-summary
■
■ router ospf area backbone nssa < 0 to 16777215 >
Define a "not-so-stubby" area (or NSSA) and its cost.
Range: < 0 to 16777215 >
Next Available Options:
metric-type
■
no-summary
■
ospf
■ [no] router ospf
Usage: [no] router ospf [...]
Description: Enable/disable/configure Open Shortest Path First (OSPF)
Next Available Options:
area -- Define/remove an OSPF area, area range or virtual
■
default-metric
■
imported into OSPF by this
distance
■
routes learned by
metric-type
■
imported into OSPF by this
redistribute
■
into OSPF(p. 485)
restrict -- Prevent redistribution of routes via
■
rfc1583-compatibility
■
© 2009 Hewlett-Packard Development Company, L.P.
< type1 | type2 > -- Metric type of the type-7
-- Do not send summary LSA into the
< type1 | type2 > -- Metric type of the type-7
-- Do not send summary LSA into the
protocol on the device, or enter OSPF Configuration Context.
Called without 'no', the command enables OSPF on the device
and changes current context to OSPF Configuration Context.
Otherwise ('no' is specified) the command disables OSPF. The
command can be followed by an OSPF configuration command. Use
'router ospf ?' to get a list of all possible options.
< 0 to 16777215 > -- The default metric used for advertising external routes
router(p. 478)
-- Set administrative distance to associate with intra-area, inter-area and AS-external
OSPF(p. 479)
< type1 | type2 > -- The default metric type used for advertising external routes
router(p. 482)
< connected | static | rip > -- Specify source protocols which will be redistributed
-- Enable/disable RFC-1583
default.(p. 482)
area.(p. 482)
default.(p. 482)
area.(p. 482)
link(p. 474)
OSPF(p. 485)
compatibility(p. 486)
router
483