HP ProCurve 5400zl Reference Manual page 101

Command Line Interface Reference Guide
filename
■
cv_out_flash
■
xmodem
■
cv_out_flash
■
■ copy running-config
tftp -- Copy data to a TFTP server.
■
tftp-ip
■
filename
■
■
■
tftp-ipv6
■
filename
■
■
■
usb -- Copy data to a USB flash drive.
■
filename
■
xmodem
■
pc -- Change CR/LF to PC style.
■
unix
■
■ copy startup-config
tftp -- Copy data to a TFTP server.
■
tftp-ip
■
filename
■
■
■
tftp-ipv6
■
filename
■
■
■
usb -- Copy data to a USB flash drive.
■
filename
■
xmodem
■
pc -- Change CR/LF to PC style.
■
unix
■
■ copy tftp -- Copy data from a TFTP server.
autorun-cert-file
■
tftp-ip
■
filename
■
■
■
■
tftp-ipv6
■
filename
■
■
■
■
© 2009 Hewlett-Packard Development Company, L.P.
-- Specify filename for the TFTP transfer. (ASCII-STR)
< primary | secondary > -- Copy from primary/secondary flash.
-- Use xmodem on the terminal as the data destination.
< primary | secondary > -- Copy from primary/secondary flash.
-- Copy running configuration file.
-- Specify TFTP server IPv4 address. (IP-ADDR)
-- Specify filename for the TFTP transfer. (ASCII-STR)
pc -- Change CR/LF to PC style.
unix -- Change CR/LF to unix style.
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify filename for the TFTP transfer. (ASCII-STR)
pc -- Change CR/LF to PC style.
unix -- Change CR/LF to unix style.
-- Specify filename for the USB transfer. (ASCII-STR)
-- Use xmodem on the terminal as the data destination.
-- Change CR/LF to unix style.
-- Copy in-flash configuration file.
-- Specify TFTP server IPv4 address. (IP-ADDR)
-- Specify filename for the TFTP transfer. (ASCII-STR)
pc -- Change CR/LF to PC style.
unix -- Change CR/LF to unix style.
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify filename for the TFTP transfer. (ASCII-STR)
pc -- Change CR/LF to PC style.
unix -- Change CR/LF to unix style.
-- Specify filename for the USB transfer. (ASCII-STR)
-- Use xmodem on the terminal as the data destination.
-- Change CR/LF to unix style.
-- Copy autorun trusted certificate to the switch.
-- Specify TFTP server IPv4 address. (IP-ADDR)
-- Specify filename for the TFTP transfer. (ASCII-STR)
append -- Add the key(s) for operator access.
manager -- Replace the key(s) for manager access; follow with the 'append' option
to add the key(s). (p. 117)
append -- Add the key(s) for access.
■
operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s).
append -- Add the key(s) for access.
■
-- Specify TFTP server IPv6 address. (IPV6-ADDR)
-- Specify filename for the TFTP transfer. (ASCII-STR)
append -- Add the key(s) for operator access.
manager -- Replace the key(s) for manager access; follow with the 'append' option
to add the key(s). (p. 117)
append -- Add the key(s) for access.
■
operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s).
(p. 123)
(p. 124)
(p. 120)
(p. 131)
(p. 120)
(p. 131)
(p. 133)
(p. 120)
(p. 131)
(p. 123)
(p. 124)
(p. 120)
(p. 131)
(p. 120)
(p. 131)
(p. 133)
(p. 120)
(p. 131)
(p. 124)
(p. 102)
(p. 102)
(p. 119)
(p. 102)
(p. 102)
(p. 102)
(p. 119)
(p. 109)
(p. 135)
(p. 126)
(p. 109)
(p. 129)
(p. 109)
(p. 109)
(p. 135)
(p. 126)
(p. 109)
(p. 129)
(p. 109)
(p. 109)
(p. 135)
(p. 105)
(p. 126)
(p. 109)
(p. 129)
(p. 109)
copy
(p. 108)
(p. 108)
99