Command Details - HP ProCurve 5400zl Reference Manual

Command Line Interface Reference Guide

COMMAND DETAILS

destination (p. 509)
polling (p. 509)
sampling (p. 509)
destination
■ sflow < 1 to 3 > destination IP-ADDR
IP address of sFlow receiver/collector/management station.
Next Available Option:
sflow-udp-port
■
station. (NUMBER)
polling
■ sflow < 1 to 3 > polling [ETHERNET] PORT-LIST
Specify the ports for which packets are to be polled.
Next Available Options:
sflow-polling-int-off
■
sflow-polling-interval
■
polling of counters.
sampling
■ sflow < 1 to 3 > sampling [ETHERNET] PORT-LIST
Specify the ports for which packets are to be sampled.
Next Available Options:
sflow-sampler-off
■
sflow-sampler-rate
■
(p. 510)
sflow-polling-interval
■ sflow < 1 to 3 > polling [ETHERNET] PORT-LIST < 20 to 2147483647 >
Specify the maximum interval (seconds) between polling of counters.
Range: < 20 to 2147483647 >
sflow-polling-int-off
■ sflow < 1 to 3 > polling [ETHERNET] PORT-LIST < 0 >
Disable polling of counters.
Supported Values:
■ 0 -- Disable polling.
© 2009 Hewlett-Packard Development Company, L.P.
sflow-polling-interval (p. 509)
sflow-polling-int-off (p. 509)
sflow-receiver (p. 510)
< 1 to 65535 > -- UDP application port of sFlow receiver/collector/management
(p. 510)
< 0 > -- Disable polling of counters.
< 20 to 2147483647 > -- Specify the maximum interval (seconds) between
(p. 509)
< 0 > -- Disable sampling.
< 50 to 16441700 > -- Specify N, where 1/N is the number of packets sampled.
sflow-sampler-off (p. 510)
sflow-sampler-rate (p. 510)
sflow-udp-port (p. 510)
(p. 509)
(p. 510)
sflow
509