HP ProCurve 5400zl Reference Manual page 729

Command Line Interface Reference Guide
host
■ vlan VLAN-ID connection-rate-filter unblock host IP-ADDR
Match packets from the specified IP address.
igmp
■ [no] vlan VLAN-ID ip igmp
Usage: [no] ip igmp [...]
Description: Enable/disable/configure IP Multicast Group Protocol (IGMP)
Next Available Options:
querier -- Specify querier/non-querier capability for the
■
high-priority-forward
■
Multicast
auto -- Instruct the device to monitor incoming multicast traffic on the specified ports (this is
■
the default behavior) ([ethernet] PORT-LIST)
blocked
■
ports ([ethernet] PORT-LIST)
fastleave
■
forcedfastleave
■
port is cascaded ([ethernet] PORT-LIST)
forward
■
ports ([ethernet] PORT-LIST)
igmp-proxy
■ [no] vlan VLAN-ID igmp-proxy
Usage: [no] igmp-proxy DOMAIN-NAME
Description: Associate an IGMP proxy domain with a VLAN.
Next Available Option:
domain-name
■
with the VLAN. (ASCII-STR)
© 2009 Hewlett-Packard Development Company, L.P.
feature on a VLAN.
configures the IGMP feature for IGMP communication between
Multicast Routers, Multicast Servers, and Multicast Clients
connected to the device.
can be called directly from the VLAN context or may follow
the 'vlan VLAN-ID' command prefix.
the command accepts a variety of configuration parameters. To
get a list of all available parameters use 'ip igmp ?'. To
get detailed help for a parameter follow it with 'help'
keyword.
-- Enable/disable the high priority forwarding of traffic for subscribed IP
groups(p. 726)
-- Instruct the device to drop incoming multicast packets received on the specified
(p. 720)
-- Enables or disables IGMP Fast Leaves ([ethernet] PORT-LIST)
-- When enabled, this feature forces IGMP Fast Leaves to occur even when the
-- Instruct the device to forward incoming multicast packets received on the specified
(p. 724)
If the 'no' keyword is used:
If the DOMAIN-NAME is left blank, all the domains
associated with the respective VLAN will be disassociated.
If a DOMAIN-NAME is specified, The specified domain will
be disassociated from the respecive VLAN.
If the 'no' keyword is not used:
If the DOMAIN-NAME matches the domain name of an
existing domain, the respective domain will be associated
with the respective VLAN.
< END OF PRINTABLE > -- Specify the domain name to associate/disassociate
(p. 722)
This command enables, disables or
This is a VLAN context command. It
If not preceded by 'no',
VLAN(p. 744)
(p. 719)
(p. 724)
vlan
(p. 723)
727