HP ProCurve 5400zl Reference Manual page 260

Command Line Interface Reference Guide
output
■ [no] interface [ETHERNET] PORT-LIST bandwidth-min output
Enable/disable and configure guaranteed minimum bandwidth for outgoing traffic.
Next Available Option:
queue1 < 0 to 100 > -- Specify min. bandwidth percentage for queue one outgoing
■
270)
override-interval
■ interface vlan VLAN-ID ip pim-dense override-interval < 500 to 6000 >
Usage: ip pim-dense override-interval <500-6000>
Description: Set the value inserted into the Override Interval field of
Range: < 500 to 6000 >
■ interface vlan VLAN-ID ip pim-sparse override-interval < 500 to 6000 >
Usage: ip pim-sparse override-interval <500-6000>
Description: Set the value inserted into the Override Interval field of
Range: < 500 to 6000 >
owner
■ interface vlan VLAN-ID vrrp vrid < 1 to 255 > owner
Usage: vrrp vrid <VRID> owner
Description: Designate the virtual router instance as an Owner (Master).
passive
■ [no] interface vlan VLAN-ID ip ospf passive
Configures an ospf interface as passive.
■ [no] interface vlan VLAN-ID ip ospf IP-ADDR passive
Configures an ospf interface as passive.
■ [no] interface vlan VLAN-ID ip ospf all passive
Configures an ospf interface as passive.
percent
■ interface [ETHERNET] PORT-LIST rate-limit icmp percent < 0 to 100 >
Specify limit as percent of inbound or outbound traffic.
© 2009 Hewlett-Packard Development Company, L.P.
a LAN Prune Delay option on this interface. Default is 2500
milliseconds.
a LAN Prune Delay option on this interface. Default is 2500
milliseconds.
There is no default value.
interface
traffic.(p.
258