HP ProCurve 5400zl Reference Manual page 164

Command Line Interface Reference Guide
mgmt-vlan
■
■ dhcp-relay option 82 validate drop
Specifies that the DHCP packet will be dropped unconditionally, if
option 82 field(s) already exists in the client DHCP packet.
Next Available Options:
mac -- Sets the remote id to be the MAC address of the switch. This is the default
■
ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
■
received.(p. 162)
mgmt-vlan
■
hop-count-increment
■ [no] dhcp-relay hop-count-increment
Optional argument to dhcp-agent used to enable/disable increment of
DHCP hop-count field.
ip
■ dhcp-relay option 82 append ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 replace ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 keep ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 drop ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 validate append ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 validate replace ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
■ dhcp-relay option 82 validate drop ip
Sets the remote id to be the IP address of the VLAN on which the client
request was received.
© 2009 Hewlett-Packard Development Company, L.P.
-- Sets the remote id to be the IP address of the Management
-- Sets the remote id to be the IP address of the Management
dhcp-relay
VLAN.(p. 163)
value.(p. 163)
VLAN.(p. 163)
162