OVERVIEW
Category:
Primary context:
Related Commands
Usage: [no] timesync <timep|sntp>
Description: Configure the network time protocol.
COMMAND STRUCTURE
■ timesync
sntp
■ timesync
timep
EXAMPLES
Example: timesync sntp
Select SNTP and configure it with unicast mode and an SNTP server at 10.28.227.141 with the default
server version (3) and default poll interval (720 seconds):
ProCurve(config)# timesync sntp
ProCurve(config)# sntp unicast
ProCurve(config)# sntp server 10.28.227.141
COMMAND DETAILS
sntp (p. 689)
sntp
■ timesync sntp
Set the time protocol to SNTP
timep
■ timesync timep
Set the time protocol to the TIME protocol
© 2009 Hewlett-Packard Development Company, L.P.
Switch Management
config
ip (page 290)
sntp (page 634)
the section called timep" (page 599)
the section called sntp" (page 592)
-- Set the time protocol to SNTP
-- Set the time protocol to the TIME protocol
timep (p. 689)
(p. 689)
(p. 689)
timesync
689